Licensed electrical contractor specializing in solar detach and reattach for residential reroofs. New hardware every time. System confirmed producing before we leave.
Most solar systems weren't built to come off twice.
On nearly every reroof we have been on, the original install has corroded anchors, failed sealant, and mounts that missed the rafter entirely.
Corroded Anchor Hardware
This lag was holding panels to the roof deck. Zero structural integrity left.
Failed Penetration & Improper Anchor
Destroyed sealant, torn shingles, mount not on a rafter. Active leak risk on every job we see.
The Difference
The old way vs. the right way.
The Old Way
Reuse whatever came off
Corroded hardware put back in place
Same failed penetrations re-sealed
No inspection before reinstall
System plugged in and left, no confirmation
No documentation for the homeowner
How We Do It
New hardware. Every job.
All-new mounting hardware on every reattach
Every anchor verified on a rafter
Fresh sealant on every penetration point
System powered on and production confirmed
Photo documentation provided after every job
Real Job · Salt Lake Valley
Same house. Better outcome.
Existing system detached, roofer finished the deck, panels back on with all-new hardware and fresh penetration seals.
Before Reroof
After Reattach
How It Works
Four steps to a clean reroof.
We coordinate with your roofer so the timeline stays tight. Call before the job starts so we can advise on your system before anything comes off.
01
Call or Text First
We review your system before anything comes off. Some older racking systems cannot be reinstalled once removed. We catch that early.
02
Detach
System de-energized, panels removed, wiring labeled and protected. Your roofer starts with a clean deck.
03
Reattach
All-new mounting hardware on your finished roof. Every anchor verified on a rafter. Every penetration freshly sealed.
04
Recommission
System powered on, production confirmed on-site, photo documentation in your hands before we leave.
100%
New hardware on every reattach
10 yr
Penetration warranty
All
Brands serviced
Day 1
Production confirmed on-site
Who You're Working With
A real electrician. Not a subcontractor you've never met.
When you call Hardwired Roof for a detach and reattach, you get a Utah-licensed electrician with hands-on experience on every major residential solar platform.
Michael Maynor
Operations Manager & Field Electrician · Solar Specialist
Utah-licensed electrical contractor and certified solar installer. Field experience on Enphase, SolarEdge, Tesla Solar Roof, Tigo, and every major residential racking platform. When you call, you get Michael, not a dispatcher.
Trusted by Utah's Roofing Contractors
Orphaned systems & discontinued racking:
Original installer out of business? We service and warrant all brands.
Some older proprietary systems can no longer be reinstalled once removed -- hardware is simply no longer manufactured.
We inspect and advise before the roof comes off so you are not finding that out mid-job.
Common Questions
What homeowners and roofers ask us.
No. We work directly with you and your roofer. If your original installer is still in business, we are happy to coordinate with them -- but it is not required. We service and warrant all major residential solar platforms regardless of who installed them.
In most cases, no -- but it depends on your equipment manufacturer. We recommend checking your warranty documentation or calling your equipment manufacturer before the job. We provide full photo documentation of the removal and reinstall, which helps if a warranty question ever comes up.
Detach is typically a half-day job. Reattach is similar, plus time to recommission and confirm production. We schedule around your roofer's timeline -- call before the job starts so we can line up the dates.
Some older proprietary systems cannot be reinstalled once removed -- the hardware is no longer manufactured. We inspect the system before the roof comes off and let you know upfront if full racking replacement is required. You will not find out after the panels are already off.
Call or text before the job starts. We schedule around your crew -- we are off the roof before you start and back on it when you are done. Your crew never touches the electrical. We provide photo documentation and itemized invoices for every job.
Get a Quote
Call before the job starts.
We will advise on your system before panels come off. No pressure -- just a straight answer on what is involved.
✓
Got it -- we'll be in touch.
Michael will reach out within one business day. Or call or text directly: (801) 989-4383
